PWS Barrel Wall Units

PWS Barrel Wall Units

Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members portal.

1. Select Wall units button on the left hand side of the ArtiCAD screen, this will load up more buttons just underneath.


2. Select the standard wall units button, this will load up more buttons just to the right.

3. Select Glass Door Unit button, this will load up a box called Glass Wall Unit.

4. Select the Feature Frame Glass Wall Unit option and then click on OK.

5. Once you have selected the feature frame unit and clicked OK it will bring up the box with the dimensions, within this box you will need to click 'Style'.

6. After you have clicked style, you will need to choose the correct frame option to change the door on the unit to a barrel door.

7. After you have chosen the correct style of door you can click on the preview button to have a look to see if the unit is correct before placing it into the plan.

    • Related Articles

    • PWS Barrell Base Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members area. 1. Select Base units button on ...

    • My curved units are showing with no doors on

      If a curved unit is showing up without doors, it's usually one of two options: Wrong Unit Selected: 1. Go into base units, select Convex / Concave Base Units (bow) 2. Often Manufacturer doors do not appear on Quarter Circle units. 3. Make sure you ...

    • I cannot position a unit without it flipping

      If you are trying to position a unit in the corner of the room or next a wall and it keeps flipping the wrong way then you need to hold down the 'Alt' key on your keyboard whilst you are moving the unit this will then stop the unit snapping and ...

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • My units are limited, not everything is showing

      Some ArtiCAD catalogues are built for you to design using codes. If manufacturer codes are selected, your unit selections may be limited. To check this: 1. Click 'File' and choose 'Select manufacturers codes' from the list. 2. Ensure that '[None]' is ...