My curved units are showing with no doors on

My curved units are showing with no doors on

If a curved unit is showing up without doors, it's usually one of two options:


Wrong Unit Selected:

1. Go into base units, select Convex / Concave Base Units (bow)

2. Often Manufacturer doors do not appear on Quarter Circle units.

3. Make sure you have selected a unit from the "Radius End" category, or Variable Radius Corner Base.

Manufacture Door:

The final reason it could be is if the manufacturer doesn't tell us they do a curved door in that range, then the door either won't show or it will show up in the wrong shape.

The way around this is to select a range from the standard door’s which matches the look of the door that you want, Most standard doors will show on curved units so it should give the look that you are after.

    • Related Articles

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • PWS Barrell Base Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members area. 1. Select Base units button on ...

    • My units are limited, not everything is showing

      Some ArtiCAD catalogues are built for you to design using codes. If manufacturer codes are selected, your unit selections may be limited. To check this: 1. Click 'File' and choose 'Select manufacturers codes' from the list. 2. Ensure that '[None]' is ...

    • How do I add frames to my units?

      1. Select 'This design' at the top of the system and click 'Room Settings' 2. In the middle of the menu, tick 'Doors have frames' - This will add frames to your units.

    • Changing attachments

      The Attachments window allows you to specify the profile of your worktop edging, cornice, pelmet and plinth, etc. (Please note that Profiles available vary between room systems). To change the attachments: 1. Select 'This Design' and choose ...