I've changed my unit colours but one won't change

I've changed my unit colours but one won't change

If you have changed the door by going to this design at the top of the screen and then going to door types, but not all of your doors are changing - This normally means you have individually customised a unit to change the door or a item on the unit such as the handle.


If you want this door to change to be the same as the rest of the room:

1. Select the unit individually and change the door by going pressing F1 to edit.

2. Select customise, select change.

3. You can change this unit door to be the same as the rest of the room.

​Alternatively you could delete the unit and and replace it and the new unit will change with the rest of the room.






    • Related Articles

    • My door colours wont change

      1. The most common reason for door colours not changing is because units have been customised individually. ArtiCAD recognises that it has been customised and therefore removing the unit or units components from the global list. 2. When 'Use linked ...

    • My curved units are showing with no doors on

      If a curved unit is showing up without doors, it's usually one of two options: Wrong Unit Selected: 1. Go into base units, select Convex / Concave Base Units (bow) 2. Often Manufacturer doors do not appear on Quarter Circle units. 3. Make sure you ...

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • How do I use manufacturer door colours?

      When selecting a door range 1. Click 'Doors' 2. Choose your manufacturer and range 3. Select 'Customise Colour' - Here you can choose the desired manufacturer colour. Materials Library If the catalogue does not include colours when selecting the door ...

    • How do I change unit dimensions?

      Individually Unit dimensions can be changed individually by: - Double click on the item - Single left click the item and select 'F1' on the keyboard. (Laptops may have an Fn button that you will also have to hold) - Right click the item and select ...