I cannot position a unit without it flipping

I cannot position a unit without it flipping

If you are trying to position a unit in the corner of the room or next a wall and it keeps flipping the wrong way then you need to hold down the 'Alt' key on your keyboard whilst you are moving the unit this will then stop the unit snapping and rotating so you can freely move the unit around.


    • Related Articles

    • My curved units are showing with no doors on

      If a curved unit is showing up without doors, it's usually one of two options: Wrong Unit Selected: 1. Go into base units, select Convex / Concave Base Units (bow) 2. Often Manufacturer doors do not appear on Quarter Circle units. 3. Make sure you ...

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • PWS Barrell Base Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members area. 1. Select Base units button on ...

    • PWS Barrel Wall Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members portal. 1. Select Wall units button on ...

    • I've changed my unit colours but one won't change

      If you have changed the door by going to this design at the top of the screen and then going to door types, but not all of your doors are changing - This normally means you have individually customised a unit to change the door or a item on the unit ...