How do I change unit dimensions?

How do I change unit dimensions?

Individually

Unit dimensions can be changed individually by:

- Double click on the item
- Single left click the item and select 'F1' on the keyboard. (Laptops may have an Fn button that you will also have to hold)
- Right click the item and select 'Edit properties'

Globally

Unit dimensions can be changed globally for the current design too. Click 'This Design' and select 'Room Settings'.

    • Related Articles

    • My curved units are showing with no doors on

      If a curved unit is showing up without doors, it's usually one of two options: Wrong Unit Selected: 1. Go into base units, select Convex / Concave Base Units (bow) 2. Often Manufacturer doors do not appear on Quarter Circle units. 3. Make sure you ...

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • PWS Barrell Base Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members area. 1. Select Base units button on ...

    • PWS Barrel Wall Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members portal. 1. Select Wall units button on ...

    • I've changed my unit colours but one won't change

      If you have changed the door by going to this design at the top of the screen and then going to door types, but not all of your doors are changing - This normally means you have individually customised a unit to change the door or a item on the unit ...