Changing attachments

Changing attachments

The Attachments window allows you to specify the profile of your worktop edging, cornice, pelmet and plinth, etc. (Please note that Profiles available vary between room systems).

To change the attachments:

1. Select 'This Design' and choose 'Attachments' from the list.

2. Choose the attachment type that you want to alter and click 'Change'.

3. Once you have found the attachment type, select it by clicking the name.

4. Once all attachments are chosen, click 'Close'.
​
Cornice, pelmet and plinth have a special 'hidden' option. This removes these attachments from all the units in your design.

    • Related Articles

    • My curved units are showing with no doors on

      If a curved unit is showing up without doors, it's usually one of two options: Wrong Unit Selected: 1. Go into base units, select Convex / Concave Base Units (bow) 2. Often Manufacturer doors do not appear on Quarter Circle units. 3. Make sure you ...

    • How do I take the doors off of the units to view the internals?

      1. Go to This Design the top of the screen 2. Select Room Settings ​3. In here there is an option for Include/ Remove Unit doors this heading will have two options to choose from, Select remove unit doors and now your renders will show the internals ...

    • I've changed my unit colours but one won't change

      If you have changed the door by going to this design at the top of the screen and then going to door types, but not all of your doors are changing - This normally means you have individually customised a unit to change the door or a item on the unit ...

    • How do I add frames to my units?

      1. Select 'This design' at the top of the system and click 'Room Settings' 2. In the middle of the menu, tick 'Doors have frames' - This will add frames to your units.

    • PWS Barrell Base Units

      Please make sure your Door Manufacturer is selected on PWS and the Range is selected on a Remo or Avant door. To download the PWS manufacturers graphics please visit the graphics download section of the members area. 1. Select Base units button on ...